DUDAS SOBRE CENTRALITA 1.2 PRO

Responder
Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

DUDAS SOBRE CENTRALITA 1.2 PRO

Mensaje por HAL »

Escrito originalmente por Guest enri63 en 24 de Marzo del 2010
Imagen Hola a todos.
A ver quien me contesta a esto... A un familiar mio le han ofrecido una centralita SSD 1.2, nueva, y quisiera saber si se puede convertir en PRO, con las mismas prestaciones que tendria la 1.5, o si tiene menos posibilidades. La va a usar con tres coches como mucho, y cuatro cambios, no creo que vaya con más, ¡al final, casi siempre juega solo! ¡Snifff!, por eso si la compra, quiere hacerle la modificación PRO, por el tema del coche fantasma, más que nada. Si interesa, ya se la mandaria a Riko (que si me está leyendo, por favor me diga algo).
Gracias y saludos.



Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por RikoRocket en 24 de Marzo del 2010
enri63 escribió:Mié Mar 24, 2010 9:31 amImagen Hola a todos.
A ver quien me contesta a esto... A un familiar mio le han ofrecido una centralita SSD 1.2, nueva, y quisiera saber si se puede convertir en PRO, con las mismas prestaciones que tendria la 1.5, o si tiene menos posibilidades. La va a usar con tres coches como mucho, y cuatro cambios, no creo que vaya con más, ¡al final, casi siempre juega solo! ¡Snifff!, por eso si la compra, quiere hacerle la modificación PRO, por el tema del coche fantasma, más que nada. Si interesa, ya se la mandaria a Riko (que si me está leyendo, por favor me diga algo).
Gracias y saludos.
I am reading!
We limited PB-ProEsp conversion to version 1.5 because the earlier versions had many failures due to the weak power section. It was so bad that at one point Superslot were exchanging old versions for new V1.5. No longer unfortunately.
I am converting very many 1.2 now, but only by changing the power section to S-H. The cost is nearly 4x a normal PB-Pro conversion. Imagen
Your best option is to swap with a version 1.5 - for example if anyone on slotdigital has a v1.5 that they want converting to PB-ProSH (as the version is then irrelevant)
Cheers
Riko Imagen

Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por Guest enri63 en 25 de Marzo del 2010
RikoRocket escribió:Mié Mar 24, 2010 9:17 pmI am reading!
We limited PB-ProEsp conversion to version 1.5 because the earlier versions had many failures due to the weak power section. It was so bad that at one point Superslot were exchanging old versions for new V1.5. No longer unfortunately.
I am converting very many 1.2 now, but only by changing the power section to S-H. The cost is nearly 4x a normal PB-Pro conversion. Imagen
Your best option is to swap with a version 1.5 - for example if anyone on slotdigital has a v1.5 that they want converting to PB-ProSH (as the version is then irrelevant)
Cheers
Riko Imagen
Grcias por la info.

Responder

Volver a “Sistema SSD”