PCLapcounter must use 2 sensors to operate. (SSDC needs one or two optional)jmkinki escribió:Dom May 01, 2011 8:18 amMuchas gracias a los 2. Voy a modificar un poco el circuito para añadirle el sensor de entrada a pit lane... ya que tengo todo el pack, de qué sirve si no lo uso, verdad???
PCLapcounter allows refuelling only in the pit lane
PClapcounter uses display to indicate that a penalty is applied (drive through box)
For full functionality go to the pCLapcounter website, www.pclapcounter.be/pit-pro.html
Detect pit IN / OUT.
Give a Stop & Go penalty when driver run to fast in the pit lane area.
Lights up the PLG lights like this:
Big green lights up when the track is opened and flash during a trackcall.
Big red lights up when the track is closed, slow flash during race pause and fast flash during countdown.
For each driver Pc Lap Counter lights up 3 lights like this:
The left one is for fuel, middle one is for the Pit Stop and the right one is for the stop & go penalty.
Fuel light will medium flash when the tank reach 20% and will fast flash when the tank reach the low fuel valuet (see fuel management options).
During refuel the low fuel AND the pit stop light will medium flash , if the car move during the refueling these 2 lights will not more flashing and the refuel is pausing, when the tank is full only the pit stop light will fast flash.
Stop & Go light will fast flash when the driver get a Stop & Go penalty