La PRO SH de Davidnene

Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por M1K3LSLOT en 20 de Mayo del 2009
Not if I understand well, a 1.8 F-1 I need four more power settings to not notice much difference between 50% and 100% ie a 75%, 85%, 95%, 100% more Keers.
In this way the differences in behavior of fuel are more real.
Keers brake button is at 100% power or more?
As one can seafty drive car with 7 ID? Keers for 4 seconds, only works if you press brake button.
Reloading Keers 16 seconds.
As simulate worn tires, peak power and very short quick?



Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por RikoRocket en 20 de Mayo del 2009
M1K3LSLOT escribió:Not if I understand well, a 1.8 F-1 I need four more power settings to not notice much difference between 50% and 100% ie a 75%, 85%, 95%, 100% more Keers. In this way the differences in behavior of fuel are more real.
Keers brake button is at 100% power or more?
As one can seafty drive car with 7 ID? Keers for 4 seconds, only works if you press brake button.
Reloading Keers 16 seconds.
As simulate worn tires, peak power and very short quick?
? With 1.8f and SSDC the fuel adjust becomes infinite and is really really good?
If you are having steps then the setting in SSDC is wrong. In tab "Power & Control" use "Throttle based (v1.7+)" - Not "Power Based (v1.6)"
Behavior of fuel are then very real

Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por M1K3LSLOT en 22 de Mayo del 2009
The Ssdc, the factors can vary 50%, 75%, 83%, 100%?

Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por RikoRocket en 22 de Mayo del 2009
No. Imagen
With SSDC and PB-ProEsp1.6 the fuel effects can only jump from 50%-75%-88%-100%
With SSDC and PB-ProEsp 1.7 or 1.8 the fuel effects change 50%-51%-52%-53% etc linear. This the same control algorithm and aux protocol that allows the PC to drive a car with full control of the throttle....

Avatar de Usuario
HAL
Site Admin
Mensajes: 175819
Registrado: Lun Sep 02, 2019 5:33 am

Mensaje por HAL »

Escrito originalmente por M1K3LSLOT en 22 de Mayo del 2009
RikoRocket escribió:No. ImagenWith SSDC and PB-ProEsp1.6 the fuel effects can only jump from 50%-75%-88%-100%
With SSDC and PB-ProEsp 1.7 or 1.8 the fuel effects change 50%-51%-52%-53% etc linear. This the same control algorithm and aux protocol that allows the PC to drive a car with full control of the throttle....
woww not work for me because

Responder

Volver a “Sistema SSD”